Go to contents Go to global navigation Go to footer
회사소개

꿈과 희망을 주는 기업, 동신이엔텍이 되겠습니다.

홈Business AreaRenewable Energy BusinessEnergy Storage System

Renewable Energy Business

Energy Storage System

Transform the DC(Direct Current) generated from solar cell to AC and store the electric power supply dump power to a storage battery, which enables you to use electricity

Characteristics

  • Portable generation device which contains the battery pack. MPPT range which can be received by the solar cell is 30~70Vdc. It can supply the 24Vdc output and the 220Vac power.
  • The capacity of battery is 500W~1500W and when connected to 300W solar cell module, it can be fully charged within 5~10 hours.
  • The outputable maximum discharge current is 40.5A and the number of the charge/discharge operation is more than 3000 times. As a protection device, it has a function of protecting the circuit from low current, low voltage, overvoltage and overcurrent of in/output. It also contains the battery power management device in order to prevent the overcharge state and partial failure of the battery.

ESS TYPE Inverter

  • The device which transforms the DC generated from solar cell to AC, stores in the storage device and supply it to the recipient.
  • It can be easily installed in areas such as mountains, outdoor campsites or campsites and street vendors which need electricity.

DSIC Series (ESS Type) Specification

Item Model DSIC-05 DSIC-10 DSIC-15
Operation Output operation method Stand-alone
Input control system MPPT
Input MPPT voltage range 30~70VDC
Maximum input current 20A
Rated voltage 12VDC 24VDC
Output Constant 2
Rated voltage 220VAC
Rated frequency 50/60Hz
Efficiency 90%
Battery Battery Type Lithium Iron Phosphate
Capacity/ Volume 500W 1000W 1500W
Rated voltage  12.8VDC 25.6VDC
The maximum discharge current 40.5A 60A
Insulation Systems Insulation Resistance More than 2MΩ
Charge and discharge times 3000 times (80% guarantee)
Cooling system Forced Air Cooled
Operating conditions Ambient Temperature -10~40℃
Protection Input voltage / current monitoring, Overload and overheat protection